This article I will discuss about one type of damage that might be considered mild on your phone. In fact, rarely do we find minor damage such as speaker phones dead. This problem is minor and easily remedied, but if the user does not understand the issue of mobile phone then this problem would be a very serious problem.
Speaker death is generally caused because the phone is dropped, banged hard objects or due to hit the water. If you already understand the methods to overcome it will be easy to handle. Phones that have damage to your speakers have a sign as follows:
The sound produced on the speaker phone sounded very small.
On receipt of a phone, you can not hear the other person, so this problem will be troublesome if it occurs at an awkward time.
Before doing the repair to disassemble the phone, it is good to perform steps - steps as follows:
Open the phone menu, select the menu settings or set up. Check the volume on the phone, probably before the volume is turned off so that no sound is produced.
On a new type of mobile phone and activate the profile menu open the general profile / public and press the select button, then go to personalize and maximize volume.
Ensure that the ON / OFF volume in good condition.
If the above items have been done but the phone still remain unheard voice on the speaker must have the courage to do the demolition on the phone. Steps must be performed in repair at the speakers are as follows:
Open up the phone and open the cashing cover also all existing bolts on your phone by using a special screwdriver to open the phone to type or brand cell phone.
After all the phone apart, look at the top of the phone. In that section there is a ring-shaped component, usually black and has a 2-foot connector that has the function to connect the speakerphone with the phone. When the phone has been used then the part is usually dirty or rusty dust that causes speeakernya dead. It usually occurs because the electric current does not flow perfectly into the speakerphone.
Clean the point the speaker connector on the PCB with a rubber eraser or brush cutter with direction and be sure not served until damaging the connector that connects to the phone.
Pull the speaker connector legs slightly upwards slowly - do not land until it loose or broken connectors so that the foot really - really perfect on the machine attached to the phone so that current flows perfectly and the voice on the speaker back out. However, if the speaker is damaged or dies, then it must be replaced with new ones according to the type and cell type. To check whether the speaker is either dead or still then have to use the tool multitester.
Thus a glimpse of one type of minor damage to the phone in my article this time. A little knowledge I have and I try to share with all my blog visitors who had a late trouble on cell phones owned. Hopefully the contents of my article this time could provide benefits for all and increase knowledge for all. Thank you.
